MTN Mad Maxxx Spray Paint 750ml


A revolutionary spray paint with an ultra-wide, thick, chisel outline that measures about 40 cm in width. It’s specially designed for filling in large surface areas at unprecedented speeds and is also useful for doing gigantic typographic letters due to its powerful, transversal line.
Fabricated with acrylic, solvent-based, matte black paint of exceptional quality and with strong covering power.
Due to its characteristics it may also be used as a finishing coat on interior and exterior surfaces.

– High pressure.
– Very fast drying.
– Does not contain lead nor other heavy metals.
– Excellent flexibility.
– Excellent covering capability.
– Easy to apply and repaint.
– Good resistance to weathering.
– Very good resistance to UV light.

MTN Mad Maxxx Spray Paint 750ml - RV-9001 Black685
MTN Mad Maxxx Spray Paint 750ml - RV-9010 White685


MTN MAXIMO’S Crazy Brother. The 750 ml format MAXIMO range expands with MAD MAXXX, a revolutionary, 25 – 30 cm wide, dense, chiseled line spray paint.

Specially designed to fill large surfaces at an unprecedented speed, MADMAXXX is also useful for painting gigantic typography, thanks to its powerful transversal line.

Controllable Power. Two components in this spray paint have been optimized to result in maximum power: the valve flow and the cap. Adjustments to the formula offer a dense paint that prevents running and drips, and it is so quick-drying that it may be repainted after seconds. Its easy-to-use valve is also suitable for outlining large shapes with precision.
In addition, the paint is 100% compatible with the rest of the Montana Colors spray paints.

Since this is a high pressure spray paint with a long range projection, we recommend its use for exterior spaces and for filling in, signage and marking.
Being that it is a high quality paint, its possibilities for use are endless in situations where its characteristics are required

– Shake the aerosol well before using, for approximately one minute after hearing the sound of the mixer.
– Apply to clean, dry surfaces. On rusty metal surfaces remove rust with a wire brush and prepare an anti-rust primer if considered necessary. Apply a primer layer on plastics and polyesters
– Second coat may be applied within fifteen minutes.
– Turn the aerosol upside down to clean out the valve after use. If the nozzle becomes blocked replace it with a new one.
– Never apply to equipment that is plugged in and use in well ventilated areas.
– ATTENTION: High pressure product. Use safety glasses.
– Request safety datasheets

Go to Top