MTN PRO Acrylic Varnish

₱610

Out of stock

MTN PRO Acrylic Varnish is made with solvent-based thermoplastic acrylic resins. Ultra-fast drying, its main function is to protect and protect different surfaces.

It can be applied for indoor and outdoor use on a multitude of materials in order to increase surface protection in three finishes: glossy, satin or matt.

Different finishes will be obtained depending on the number of layers applied. Completely transparent and does not yellow.

GENERAL DESCRIPTION
Fast drying, thermoplastic acrylic resin-based varnish. Available in glossy, satin finish and matte.

FEATURES
– Very fast drying.
– Good hardness.
– Excellent adhesion.
– Good elasticity.
– High durability.
– Easy to apply and recoat.
– Good water resistant.
– Non-yellowing.
– Good resistance to UV light.

On newly painted surfaces or old paint, do a test first in order to see the results, as the varnish may crack the previous layer.

ImageNamePriceBuy
MTN PRO Acrylic Varnish - Glossy
Glossy₱610
Out of Stock
MTN PRO Acrylic Varnish - Satin
Satin₱610
Out of Stock
MTN PRO Acrylic Varnish - Matte
Matte₱610
Out of Stock

SKU: MTN-PROAV-00000 Category: Tags: , , , , ,

Description

APPLICATIONS
Acrylic varnish could be applied to many materials to protect them and at the same time to enhance their brightness. Different finishes are obtained depending on the number of coats applied.
– Wood
– Painted materials
– Serval plastics
– Wicker
– Cork
– In general, all surfaces
– Steel
– Stone that can be varnished

INSTRUCTIONS FOR USE
– Before using, shake the aerosol vigorously for approximately one minute.
– Apply over clean and dry surfaces. On rusty metallic surfaces: Remove corrosion with a wire brush. In plastics like PS and PP apply first a primer layer. See product’s behavior in any plastic surface.
– Apply thin coats for better results, better three thin layers than a thick one. It is recoatable after ten minutes.
– Hold the aerosol upside down after use to purge the valve. If the nozzle is blocked, replace it with a new one.
– Do not apply on plugged-in electrical equipment and use in well-ventilated areas.
– When applied over other paints do a preliminary test first, as sometimes the varnish can remove paint on the surface to be varnished.
– Ask for MSDS.

Related products

Go to Top